Send firmware.bin # Make sure you include a proper path to the file.
Set line /dev/ttyUSB0 # Just make sure you got the right USB interface Then start ckermit (without any arguments) and run the following commands in it (or configure your Kermit client to these parameters): These instructions assume you're using ckermit on a Linux system, but they will give you all you need to do the same on a Windows box.Įnter the boot prompt on the serial console (see above), and in your terminal program type:Įrase 0xbf020000 +7c0000 # 7c0000: size of the firmware (be aware that you may have a different size thus bricking your router) It may take forever and a half (15-20min) to transfer the image, but it's easier and more secure than running a tftp server. In such cases you can also use a Kermit client to transfer the new image on the serial connection. The tftp protocol is insecure and sometimes it doesn't work even if the console log suggests otherwise. V4 Snapshot from was working without problems
0 kommentar(er)
